Drop In Anchor
Drop-In anchors are female concrete anchors designed for anchoring into concrete. Drop the anchor into the pre-drilled hole in the concrete. Using a setting tool expands the anchor within the hole in the concrete.
Drop-in anchors require a setting tool to install. If you do not have a setting tool, be sure to purchase one.
Setting tool to install a drop-in anchor that is set by a 2-step process. The setting tool allows the anchor to expand.
Machine Screw Anchors
Machine screw anchors are made of steel for strength and durability. Anchors are designed for light to medium-duty concrete, brick, or block applications. Units require a setting tool with various diameter options.
A sleeve anchor is a medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with an expansion sleeve, spacer, nut and washer. Sleeve anchors are also available in flat head and hex bolt head types.
The Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques.
Titen Installation Tool
Make installation a breeze with Simpson's Titen Screw installation tool. It has the tools you need to install Titen Screws easily and quickly. Includes a special drill bit holder, hex sockets & phillips bits. When used in conjunction with Strong-Tie Titen drill bits you can quickly switch from drilling holes to driving Titen screws.
Light Duty Anchor
The tie-wire anchor is a wedge-style expansion anchor for use in normal-weight concrete or in concrete over metal deck. With a tri-segmented, dual-embossed clip, the tie-wire anchor is ideal for the installation of acoustic ceiling grid and is easily set with the claw of a hammer.
Torque controlled mechanical expansion wedge anchors have a Category 1 classification. They are used to resist static, wind and seismic tension and shear loads in cracked and uncracked normal weight concrete that has a specified compressive strength of between 2,500 psi (17.2 MPa) and 8,500 psi (58.6 MPa).
Nailon anchors are low cost anchors for light-duty applications under static loads. The zinc body consists of a die cast zinc alloy. The carbon steel pin and mushroom head configuration make this anchor tamper resistant.
Pin and Shot
The PDP series of powder-actuated fasteners feature .300" dia. heads and a .157" dia. shank. Available in a variety of finishes and styles.
The Lok-Bolt is an all steel pre-assembled single unit sleeve anchor which can be used in concrete or masonry units. Available in multiple head styles for multiple applications and finished appearance, extension sleeves can be added to create longer lengths.